The laser pointer pen is designed to be portable, easy to grip, and the laser module is processed into a pen emitter.

In the material after years of  laser pointer pen  optical products and infiltration of anterior posterior segment, a variety of optical materials laser pointer pen is important for all kinds of collocation in laser application. How collocation can achieve its best performance, in order to maintain the stability and service life, for example, we often say that the quartz material, the design is that of quartz, but there are dozens of concrete material hundreds of kinds of difference between the price and laser pointer pen performance of the layman may not know, but the impact on the application of laser system can be very large.


The special laser pointer pen requirements of the fiber laser is mainly manifested in: lens material selection, because the power of fiber laser now used more and more high, the current conventional flint or crown glass, due to its high laser pointer pen absorption rate and high inflation rate has been unable to heat the applicable requirements. But by now the quartz materials. Because the refractive index is too low, there are many limitations in the system design. And through the band in the 1064nm material of these problems are common. So the lens substrate selection is very important for fiber laser pointer pen.


Low power CO2 laser pointer pen engraving equipment, low power CO2 laser marking equipment, low power fiber laser marking equipment, YAG laser pointer pen marking and welding equipment, UV laser marking equipment, however, in high power laser pointer pen applications, laser optical components produced by domestic manufacturers is not up to the requirements of the application, the main the problem is that the damage threshold of coating laser optics and firmness were not enough, but also can not withstand high power or high energy laser.laser-pointer-pen2

Another key point is coating, coating the fiber laser pointer pen damage threshold requirements are very high, the film is firm and high damage threshold is the key point of application. The lens has a good performance in these three aspects, the highest can be applied in 8000W fiber laser pointer pen.


Spiral curved laser pointer pen beam is an ideal choice in the field of satellite communication.

The bending beam is different, laser pointer pen different light having a different phase, so it shows a spiral shape in the road, the spiral curved beam encryption and transmission laser pointer pen of information has almost no capacity constraints, a communication especially suited for satellite communication field. Light is an electromagnetic wave with the laser pointer pen  wave peaks and troughs, all composed of a light the laser beam has the same average phase, so the laser pointer pen  synchronous peak or trough to arrive.


In 2014, Anton Zellinger of the University of Vienna in Vienna over the curved optical information laser pointer pen  transmission experiment, the success will be Mozart and Boltzmann picture encrypted and sent 3 kilometers. But to achieve practical, curved optical information laser pointer pen  needs to be transferred at least tens of kilometers to the undisturbed free space. But the atmosphere laser pointer pen  amidst the winds of change will cause interference on the the transmission of information, resulting in transmission distance laser pointer pen  can not meet the actual application requirements.


Extraction of single particles of light may be a huge breakthrough for quantum computing. The laser pointer pen  beam composed of photons of light is the best carrier of information we have at present. But once laser pointer pen  in the field of quantum computing, we will have to use a single photon as the carrier of information, because the control of a single photon laser pointer pen  will become critical ”


Show the application of laser pointer pen  this method to create all-optical routers in quantum communication system. They created a switch laser pointer pen  along different Road King sends a single photon, the position of the switch is determined by the interaction with photons, and then through the quantum information encoding. The main laser pointer pen  advantage of quantum communication is its security; because any quantum measurement the system will produce interference of the photon. It is convenient for the operator to find any eavesdropping phenomenon. But Dayan said that their solution formulation laser pointer pen  can be used to monitor some systems.


From the original halogen lamp, high-pressure mercury lamp, xenon lamp to LED, laser pointer pen and other new light source are involved

Laser pointer pen display technology because of its wide color gamut, high brightness, long life, low energy consumption based on the traditional light source There is nothing laser pointer pen comparable to this advantage, it is known as the black and white display, color display and digital display after the fourth generation of the “successor”. From the laser pointer pen first in the world according to the number of projectors come out so far, by the researchers of the technology innovation and research, the light source of the projector is also in constant change. From the original halogen lamp, high-pressure mercury lamp, xenon lamp to LED, laser pointer pen and other new light source are involved.


From the terminal laser pointer pen projection products their technical features and the corresponding point of view, the three primary colors of pure laser pointer pen is the high-end laser projector label, projection equipment using the technology can easily reach 20000 lumens and above; fluorescent powder is corresponding to the low-end projector, the highest brightness just exceeded 10000 lumens; for LED and laser pointer pen hybrid light source technology is the low-end market, using the technology of the terminal display device, the brightness is not more than 3000 lumens.


The three primary colors of pure laser pointer pen is regarded as the most pure laser light source, which has rich color, high color saturation, can display the most abundant, most beautiful, the most true colors, has become a major laser pointer pen technology development direction of display technology field. As of now, three color laser pointer pen projection equipment using pure technology has “infiltration” to the simulation, exhibition, conference center, outdoor wall and digital cinema, home theater and other laser pointer pen fields, it has great development space and broad market prospect.


Semiconductor laser pointer pen light source is based on the semiconductor chip technology and research and design of micro laser pointer pen, and LED chip production process is similar, with a simple structure, small size, power stability, high reliability, long life and so on.


Low power laser pointer pen is often used by astronomy enthusiasts to guide stars and constellations

Usually in the newspaper, teaching, guided tours will use it to cast a light laser pointer pen or a light point to the object, but the laser will hurt the eyes, in any case should not let the laser pointer pen direct eyes.Laser pointer pen (Laser pointer), also known as laser pointer pen, refers to the star pen, etc., is designed to be visible portable laser pointer pen, hand grip, laser module (diode) processed into a pen-type transmitter. Common laser indicators are red (650-660nm, 635nm), green (515-520nm, 532nm), blue (445-450nm) and blue violet light (405nm) and so on, the power is usually in milliwatts.


Early laser pointer pens used helium-neon (HeNe) gas lasers with a wavelength of 633 nanometers (nm), and were typically used to generate laser pointer pen beams with energy not exceeding 1 mW. The cheapest laser pointer pen uses a deep red laser pointer pen diode with a wavelength close to 670 / 650nm. A slightly expensive red-orange diode with a wavelength of 635 nm is used, which is more easily identified by the human eye. There are other colors of the laser pointer pen, the most common is the 532nm wavelength of green light.


The apparent brightness of the laser pointer pen beam illuminating the spot depends not only on the power and surface reflectivity of the laser pointer pen, but also on the color perception of the human eye. For example, since the human eye is most sensitive to green light having a wavelength of 520-570 nm in the visible spectrum,   laser pointer pen the wavelength sensitivity to redder or bluer wavelengths decreases, so green light appears brighter than other colors at the same power.


Some laser pointer pen  operate in either pulse or quasi-continuous mode to reduce cooling problems and extend battery life. laser pointer pen  can have a variety of output power. 5mW is safest to use, and is also visible under darker lighting, so there is no need for more power for pointing purposes.

Inventory of six practical laser pointer pen cutting machine function, you know a few?

With the help of automatic edge laser pointer pen searching function, save the previous adjustment time, adjustment of workpiece in laser pointer pen cutting work bench (mobile) weighing hundreds of kilograms of workpiece is not easy to improve the efficiency of the machine. High power laser pointer pen  is a technologically advanced powerful cutting machine, light, machine, electricity integration laser pointer pen  of complex system. The subtle often, hidden secret. Let us work together to pry the secret.


Concentrated perforation, also known as pre perforation is a process of processing, the machine itself is not functional.Laser pointer pen  cutting of thick plates, cutting each contour have experienced two stages: 1 perforation, 2 cutting holes to be concentrated. Avoid burning. The plate laser pointer pen  perforation process, the formation of heat accumulation in perforation around the point, such as the next cut, there will be overfiring. The perforation process, complete laser pointer pen  all perforation, then return to the starting point when cutting, because of time sufficient laser pointer pen heat dissipation, avoid burning phenomenon.


Concentrated perforation can improve machining efficiency. At present, there are still many do not have the function of automatic focusing laser pointer pen cutting machine. The processing parameters of cutting plate, perforation, two stages is different. In the process of perforation of nozzle height laser pointer pen is higher than if the cutting process. Take the conventional processing technology, in order laser pointer pen to guarantee the cutting quality and efficiency, focus only in accordance with the needs of the laser pointer pen beam cutting artificial setting to the best position.


Laser pointer pen cutting, plate material is a support hold indented. Cut off parts, if not small, not   laser pointer pen falling from the gap of the brace bar; if it is not big enough, can not be supported a hold; lose balance, cutting laser pointer pen head tilt. High speed may collide with them. The light is shut down, heavy damage to the cutting head.


High precision, low cost, high quality, high quality, high quality, high quality, new type of laser pointer pen dust sensor

With the rapid change of science laser pointer pen and technology, dust sensor by infrared laser, from passive to active air intake, the product also has a low laser pointer pen  grade levels, in the face of the terminal needs of different applications. Recently, hunting cloud network learned that such a focus on the research and production of new laser pointer pen dust sensor, the Prius high, focus on the field of air purification provides precise, stable, laser pointer pen dust sensor without noise.


With the innovation of technology, the measurement accuracy of the infrared sensor laser pointer pen   dust exposed problems, poor stability, error rate even reached 200%, greatly reducing the consumer confidence of cleaner, was criticized by the birth of enterprise cleaner; laser pointer pen   dust sensor is largely solves the problem of infrared dust sensor, with its precision high consistency and strong stability, began to gradually replace the trend. Although the principle of infrared infrared dust sensor also occupy the market laser pointer pen   half of the country, and the trend has been formed, there is a large space laser pointer pen   market development.


Does not affect the working life of laser pointer pen to eliminate acne and India, it only takes a few minutes to complete the whole course   laser pointer pen of treatment, fast and convenient, at the same time due to the strong pulse laser pointer pen light stimulation and no damage to the skin, so with no pain, no trauma, surgery does not need to rest, do not affect the normal  laser pointer pen.laser-pointer-pen3

Safe, no side effects: traditional laser pointer pen acne, acne India oral drugs or use face cream, cream smearing will cause some side effects,  laser pointer pen such as causing local skin erythema or peeling, only temporarily alleviate the effect, is a palliative; and eliminate acne is the use of laser pointer pen selective photothermal laser pointer pen principle blasting, pigment lesions, eliminate acne method, and no recurrence of live.laser-pointer-pen4